Standard or Extended studs

In this guide

Bolt On Spacer kits for cars with wheel nuts come with studs fitted to the Spacer, for your wheel nuts to go on. You can choose Standard or Extended studs. Extended studs stand further out from the Spacer.

In short

  • Standard studs give 26mm of thread. Extended studs give 46mm, or 42mm on M14x2.
  • The stud has to go through your wheel and still leave enough thread for the nut to grip.
  • Thick wheels, open-ended nuts and a Slip On Spacer fitted on top can all need Extended.
StandardExtendedSpacerYour wheelWheel nut

Which you need

Most of the time it's down to your wheels. The thicker your wheel is where the nuts sit, the less thread is left for the nut. To check:

  1. Measure how thick the wheel is at a stud hole, from the back of the wheel, where it sits flat, to the seat the nut tightens on.
  2. Add the diameter of the thread: 12mm for M12, 14mm for M14 or 13mm for 1/2in UNF. The nut needs at least that much thread to grip.
  3. If the total is 26mm or less, Standard studs are long enough. If it's more, choose Extended. More than 46mm, or 42mm on M14x2? Send us a message.

For example, a wheel 15mm thick at the stud hole, on M12 studs: 15 + 12 = 27mm. That's more than 26mm, so choose Extended.

You may also need Extended studs if:

  • you'll fit a Slip On Spacer over a Bolt On Spacer or a PCD Adapter
  • you use open-ended wheel nuts and want the studs to come through them
  • your car has longer studs as standard, as Aston Martin Vantage models do

Check how far your car's original studs stand out from the hub before you choose.

Open and closed nuts

An open nut lets the stud come out through its end, so a longer stud is no problem. A closed nut has an end, so the stud has to stop short of it. If the stud reaches the end first, the nut feels tight but isn't holding the wheel.

Open nutClosed nutRoom leftinside

If you use closed nuts, check how deep they are before you choose Extended studs.

Which threads

Extended studs are made in M12x1.25, M12x1.5, M14x1.5, M14x2 and 1/2"-20 UNF. Kits in other threads come with Standard studs.

When you order

Choose Standard or Extended under Stud length, on the Spacer page or in step 5 of the builder, Wheel side (your wheels). The price difference shows when you choose.

Find Spacers for your car

Pick your car, or build your own to your measurements.