Build your own Spacers or PCD Adapters

Made to your measurements and sold in pairs.

Your spec

Choose a type to start.

Your spec

Step 1 of 6: Type Next: PCD

Which type do you need?
Not sure which? See the difference
Which type do you need?

  • Made to order in 10 working daysOr 5 working days with Express
  • Free UK Mainland DeliveryOn Orders Over £150

Hubcentric lip

The hub lip is the raised ring in the middle of your car's hub. It centres the wheel. A hubcentric Spacer or Adapter has its own lip on the wheel side, so the wheel is centred on it in the same way.

We recommend Yes. Without the lip, the Spacer or Adapter doesn't centre the wheel.

Will it clear my hub?

Your car's hub lip sits in a recess in the back, so it can't be deeper than the recess.

How to measure your hub lip

Hub Hub lip Flat face of the hub Hub lip depth

Measure from the flat face of the hub to the end of the lip.

Frequently asked questions

Quick answers about building and ordering.

What's the difference between Bolt On, Slip On and PCD Adapter?

A Bolt On Spacer kit fixes to your hub with the fixings that come with it, and your wheel then fits to the Spacer. A Slip On Spacer fits over your existing wheel bolts or studs. No fixings come with it, so you'll need wheel bolts or studs long enough for the added thickness.

A PCD Adapter fixes to your hub like a Bolt On kit and comes with fixings, but has a different PCD on the wheel side, so you can fit wheels with a different PCD. Your car and your wheels need the same number of studs.

Where do I find my car's PCD, centre bore and thread?

The vehicle finder on our home page matches them for you from your car's year, make and model. If you're not sure, send us a message with your car's details.

Which thickness do I need?

Measure the room you have to the wheel arch and to the strut at each corner. The Spacer can't be thicker than the room to the arch, and the wheel and tyre need room to move with the suspension and steering without touching anything. How close you go is your decision. Choosing a thickness shows how to measure.

What is the hubcentric lip, and do I need it?

The hub lip is the raised ring in the middle of your car's hub. It centres the wheel. A hubcentric Spacer or Adapter has its own lip on the wheel side, so the wheel is centred on it in the same way.

We recommend having the lip: without it, the Spacer or Adapter doesn't centre the wheel. Your hub lip must be no deeper than the clearance shown for the thickness you choose.

Do I need Standard or Extended studs?

You choose this when your wheels fix on with wheel nuts. Standard studs have a 26mm thread and Extended studs a 46mm thread. Most of the time it's down to your wheels: the thicker your wheel is where the nuts sit, the longer the stud it needs. You may also need Extended studs if you'll fit a Slip On Spacer over a Bolt On kit or PCD Adapter, use open-ended wheel nuts, or your car has longer studs as standard. See Standard or Extended studs.

Do I need longer wheel bolts or studs with Slip On?

Yes. No fixings come with a Slip On Spacer, and your wheel bolts or studs need to be long enough for the added thickness. Wheel bolt and stud length shows how to check yours, and you'll find longer ones in our Wheel Bolts & Fixings collection.

What torque should I use?

Your vehicle manufacturer's torque settings, both for fixing the Spacer or Adapter to your hub and for fixing your wheel to the Spacer or Adapter.

How long will my order take?

Everything is made to order: in 10 working days, or in 5 working days with Express. Delivery then depends on the service you choose and where you are. See our delivery policy.

Is the price for one or two?

Two. Everything is sold as a pair.

How much is delivery?

Delivery is free to UK mainland addresses on orders over £150. Our delivery policy has the costs for smaller orders and other addresses.