6x139.7 100.3mm M14x1.5 Hubcentric Bolt On Wheel Spacer Kit for Wheel Nuts (Pair)
inc. VAT
- Made to order in 10 working daysOr 5 working days with Express
- Free UK Mainland DeliveryOn Orders Over £150
Your vehicle
Specification
- PCD
- 6x139.7
- Centre bore
- 100.3mm
- Thread
- M14 x 1.5
- Fixing
- Wheel Nuts
- Fixings
- Included
This spec is also made as a Slip On Spacer, 10mm to 25mm. View Slip On Spacers
Measure from the flat face of the hub to the end of the lip.
Express is charged for each pair in your order.
What's in the box
- 2Spacers in 6082-T6 billet aluminium, machined finish
- 12high tensile steel studs, M14 x 1.5, fitted in the Spacers for your wheel nuts
- 12high tensile steel nuts, M14 x 1.5, to fix the Spacers to your hub
- 6082-T6 Billet Aluminium
- Over 15 Years of Experience
- Custom Sizes Available
- Manufactured in Devon, UK
Frequently asked questions
Quick answers about choosing and ordering Spacers.
Will these Spacers fit my car?
Check that the PCD, centre bore and thread in the specification match your car. The vehicle finder on our home page and Spacer pages matches them for you from your car's year, make and model. If you're not sure, send us a message with your car's details.
What's the difference between Bolt On and Slip On Spacers?
A Bolt On Spacer kit fixes to your hub with the fixings that come with it, and your wheel then fits to the Spacer. A Slip On Spacer fits over your existing wheel bolts or studs. No fixings come with it, so you'll need wheel bolts or studs long enough for the added thickness.
Which thickness do I need?
Measure the room you have to the wheel arch and to the strut at each corner. The Spacer can't be thicker than the room to the arch, and the wheel and tyre need room to move with the suspension and steering without touching anything. How close you go is your decision. Choosing a thickness shows how to measure.
What is the hubcentric lip, and do I need it?
The hub lip is the raised ring in the middle of your car's hub. It centres the wheel. A hubcentric Spacer has its own lip on the wheel side, so the wheel is centred on the Spacer in the same way.
We recommend having the lip: without it, the Spacer doesn't centre the wheel. Your hub lip must be no deeper than the clearance shown for the thickness you choose.
Do I need Standard or Extended studs?
Standard studs have a 26mm thread and Extended studs a 46mm thread. Most of the time it's down to your wheels: the thicker your wheel is where the nuts sit, the longer the stud it needs. You may also need Extended studs if you'll fit a Slip On Spacer over this kit, use open-ended wheel nuts, or your car has longer studs as standard. See Standard or Extended studs.
What torque should I use?
Your vehicle manufacturer's torque settings, both for fixing the Spacer to your hub and for fixing your wheel to the Spacer.
How long will my order take?
Every Spacer is made to order: in 10 working days, or in 5 working days with Express. Delivery then depends on the service you choose and where you are. See our delivery policy.
Is the price for one Spacer or two?
Two. Every Spacer is sold as a pair.
How much is delivery?
Delivery is free to UK mainland addresses on orders over £150. Our delivery policy has the costs for smaller orders and other addresses.
Can you make a size that isn't listed?
Yes. Use Build your own, in the menu at the top of the page, to choose your own sizes, or send us a message.
Still unsure? Contact us